Als Merkblatt, die Ausgabe der CL-35B2 bis zum U-Boot[1] Bootmanager über die Serielle Konsole.
Attempting to set PLLA to 750MHz ... plla_ctrl0 : 0x0000000A plla_ctrl1 : 0x000F0000 plla_ctrl2 : 0x001D01A0 plla_ctrl3 : 0x00000017 PLLA Set
Setup memory, testing, Image 0
Hdr len: 0x0001AC3C
Hdr CRC: 0x9B812E38
OK
U-Boot 1.1.2 (Oct 28 2011 – 10:57:48)
U-Boot code: 60D00000 -> 60D1AC3C BSS: -> 60D1F2F4
RAM Configuration:
Bank #0: 60000000 128 MB
SRAM Configuration:
64KB at 0x50000000
NAND:256 MiB
*** Warning – bad CRC, using default environment
In: serial
Out: serial
Err: serial
Setting Linux mem= boot arg value
Reading upgrade flag from NAND address 0x01ec0000 : 0
Hit any key to stop autoboot: 2
Und hier die Umgebungsvariablen des U-Boot:
$ printenv
bootcmd=run extinguishled boot_nand
bootdelay=2
baudrate=115200
ethaddr=00:30:e0:00:00:01
ipaddr=192.168.50.100
serverip=192.168.50.59
autoload=n
netmask=255.255.0.0
bootfile=“uImage“
load_nand=nboot 60500000 0 440000
load_nand2=nboot 60500000 0 A40000
lightled=ledfail 1
extinguishled=ledfail 0
boot=bootm 60500000
boot_nand=run load_nand boot || run load_nand2 boot || run lightled
stdin=serial
stdout=serial
stderr=serial
bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
Environment size: 579/8188 bytes
[1] Das U-Boot